Hooks
4
Small HookSmall hook, 30 mm opening- Sticks outOut
- 48 mm
- Hangs belowBelow
- 40 mm
- Filament
- 36 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Bag Handle HookBags and 2 in webbing; 54 mm opening, flat floor; cart end- Sticks outOut
- 77 mm
- Hangs belowBelow
- 56 mm
- Filament
- 73 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Stinger HookStinger coils; electric dock, nylon M5 only- Sticks outOut
- 80 mm
- Hangs belowBelow
- 62 mm
- Filament
- 92 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Wide Saddle HookBig cable coils, 66 mm opening- Sticks outOut
- 90 mm
- Hangs belowBelow
- 72 mm
- Filament
- 166 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Bins & boxes
36
Side LedgePoles, levels, pipe laid across 2-3 in a row; 2 strap slots- Sticks outOut
- 80.5 mm
- Hangs belowBelow
- 0 mm
- Filament
- 98 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Side Bin 120 (Wide, 30 mm Deep)Open bin, floor ~85 x 72 (112 x 90 rim), 30 deep, scoop ramp; cart end- Sticks outOut
- 106 mm
- Hangs belowBelow
- 40 mm
- Filament
- 291 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Side Bin 60 mm DeepSmall-parts box, 65 x 57 inside, 53-60 deep- Sticks outOut
- 76 mm
- Hangs belowBelow
- 30 mm
- Filament
- 151 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Side Bin 90 mm DeepBox 65 x 72 inside, 82-90 deep; top/middle shelf- Sticks outOut
- 76 mm
- Hangs belowBelow
- 40 mm
- Filament
- 221 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Side Bin 120 mm DeepBox 75 x 110 inside, 112-120 deep; needs 50 mm flat side; top/middle shelf- Sticks outOut
- 86 mm
- Hangs belowBelow
- 50 mm
- Filament
- 402 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Low Cradle / Cable SaddlePoles, levels, pipe, tied stinger laid across 2-3 in a row; 25 mm strap slots- Sticks outOut
- 79 mm
- Hangs belowBelow
- 47 mm
- Filament
- 99 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Low Bin 60Heavy small items low; 65 x 57 inside, 70 deep, drain- Sticks outOut
- 81 mm
- Hangs belowBelow
- 67 mm
- Filament
- 155 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Clear-Lid Cart Case 2x1 (Gridfinity floor)Small clear-lid case for lip balm, SPF, bits and earplugs. Two Gridfinity cells, one DOCK tongue.Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Clear-Lid Cart Case 3x1 (Gridfinity floor)Three-cell clear-lid case for zip ties, C-47s and small tools. Twin DOCK tongues at 60 mm.Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Clear-Lid Cart Case 4x1 (Gridfinity floor)Long four-cell clear-lid case for Sharpies, markers and hex keys. Twin DOCK tongues.Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Clear-Lid Cart Case 3x2 (Gridfinity floor)Six-cell clear-lid case for lens tissue, gels and booklets. Twin DOCK tongues.Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Clear-Lid Cart Case 4x2 (Gridfinity floor)The big one: eight cells for batteries, tape and grip hardware under one clear lid. Twin DOCK tongues.Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Stack Frame for Clear-Lid Cases (all sizes)Stack two clear-lid cases for storage or the truck. The frame straddles the lower case's DOCK tongue and locates the upper case by its bottom step.Includes 5 pieces
- Dock
- Mountless
1/4-20 Screw CupThe front wall curves into the floor, so you sweep a bolt up and out with one fingertip.- Filament
- 12 g
- Mountless
MountMountless (desk, shelf, case or screw to a panel)
Download STLs (16 files, 0.9 MB)
3/8-16 Screw CupThe same scoop cup as IA, for 3/8-16 hardware.- Filament
- 12 g
- Drops into a case
Baby-Pin Spud and Shim TrayThree round cradles hold 5/8 in baby-pin spuds half sunk, so you roll one out with your thumb.- Filament
- 42 g
- Drops into a case
1/4 in Hex Bit BarNine 1/4 in hex bits lie on a flat face in hex troughs, so they cannot roll.- Filament
- 25 g
- Drops into a case
FRESH Battery Cells (AA, AAA, 9V, CR2032)AA and AAA cells lie half sunk in cradles.- Filament
- 48 g
- Drops into a case
DEAD Battery Cells (AA, AAA, 9V, CR2032)The same layout as IE, but the tab says DEAD, with an X in the 9V bay.- Filament
- 48 g
- Drops into a case
C-47 Clothespin LanesThere are three lanes, each holding two C-47s side by side, with room for more on top if your pins are slim.- Filament
- 45 g
- Drops into a case
Zip Tie TrayThere are two long lanes for 4 in (100 mm) ties, or anything up to 120 mm.- Filament
- 34 g
- Drops into a case
Earplug DispenserA small cup for a few pairs of foam earplugs.- Filament
- 15 g
- Drops into a case
Gel Cut Square SleeveThis is a flat sleeve for 3 x 3 in gel cut squares.- Filament
- 30 g
- Drops into a case
Lens Tissue Booklet SlotThis is a flat pocket for a lens tissue booklet, with finger wells on both sides so you can lift the booklet out.- Filament
- 55 g
- Drops into a case
Sharpie and Marker TrayTwo markers sit half sunk in long cradles.- Filament
- 50 g
- Drops into a case
Lip Balm and SPF Stick CradleA lip balm tube and an SPF stick sit half sunk side by side, with a finger well in front.- Filament
- 27 g
- Drops into a case
Hook-and-Loop Roll CupA strap roll lies flat on a post and spins as you pull.- Filament
- 60 g
- Drops into a case
Small Tools Tray (Precision Screwdriver, Tweezers)A precision or pocket screwdriver sits in a cradle with its handle just under the rim.- Filament
- 34 g
- Drops into a case
Grip Hardware Quad (1/4-20, 3/8-16, Nuts, Washers)There are four scoop cups, each with its own tab: 1/4-20, 3/8-16, NUTS and WASHERS.- Filament
- 41 g
- Drops into a case
Tilt-Out Drawer 2x1 (Gridfinity floor, clear roof)A drawer that tips forward 40 deg when you pull its lip, then clicks shut. Gridfinity floor, clear roof, one DOCK tongue.Includes 3 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Gridfinity Shaker-Proof Small-Parts Bin 2x1 with Clear Flap8 cells under a clear snap-on flap that closes every cell to 0.2 mm, so nothing jumps cells on a bumpy cart. Fits under any clear case lid.Includes 2 pieces
- Mountless
MountMountless (desk, shelf, case or screw to a panel)
Download STLs (2 files, 0.2 MB)
Rain-Proof Dry Box 4x2 (gasket, clear lid)A gasketed clear-lid box on the cart for your phone, keys, wallet and fob when the rain hits. Two snap latches, solid back, drip skirt.Includes 4 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Hardware Case Layout (4x2 clear-lid case)Grip hardware: 1/4-20 and 3/8-16 bolts, nuts, washers, set screws and cotter pins, each in its own cell- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Expendables Case Layout (4x2 clear-lid case)Fresh AA, AAA, 9V and CR2032 cells beside a row of C-47 clothespins, under a clear lid- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Cart Trash Bin (1.8 L, flip lid)A 1.8 L clip-on trash bin for the side of a film cart: a push-flip lid that drops shut by itself, a bag-tuck ring that hides the liner, and a bucket that lifts out to empty.- Sticks outOut
- 116 mm
- Hangs belowBelow
- 119 mm
- Filament
- 570 g
Includes 7 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Small Cart Trash Bin (0.6 L, flip lid)A 0.6 L clip-on trash bin for the side of a film cart: a push-flip lid that drops shut by itself, a bag-tuck ring that hides the liner, and a bucket that lifts out to empty.- Sticks outOut
- 92.5 mm
- Hangs belowBelow
- 68.8 mm
- Filament
- 335 g
Includes 7 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Cups & bottles
3
Can and Bottle HolderCans and bottles, 68-72 mm pocket- Sticks outOut
- 86 mm
- Hangs belowBelow
- 52 mm
- Filament
- 143 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Coffee Cup Holder12/16/20 oz paper hot cups; straight mugs up to ~72 mm- Sticks outOut
- 93 mm
- Hangs belowBelow
- 50 mm
- Filament
- 155 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Large Water Bottle Holder89-94 mm straight bottles (32 oz wide-mouth Nalgene)- Sticks outOut
- 118 mm
- Hangs belowBelow
- 73.5 mm
- Filament
- 293 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Tape
3
3-Roll 1 in Tape Tree with Cutter3 rolls of 1 in tape (colour set), one cutter under all three, cap parking slot- Sticks outOut
- 112 mm
- Hangs belowBelow
- 135 mm
- Filament
- 319 g
Includes 3 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
2 in Gaff Dispenser with Cutter1 roll of 2 in gaff or paper, heavy cutter, cap parking slot; fit the thumbscrew if a 30 cm pull slides it- Sticks outOut
- 83.8 mm
- Hangs belowBelow
- 135 mm
- Filament
- 263 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
1 in Tape Dispenser with Cutter1 roll of 1 in tape (or 1/2 in spike), desk-style cutter, cap parking slot- Sticks outOut
- 58.4 mm
- Hangs belowBelow
- 135 mm
- Filament
- 212 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Rails & clamps
3
A-Clamp Rail#1 and #2 A-clamps, 200 mm rail- Sticks outOut
- 50 mm
- Hangs belowBelow
- 45 mm
- Filament
- 373 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
A-Clamp and C-47 Combo RailC-47s plus A-clamps, 22 mm jaw gap- Sticks outOut
- 81 mm
- Hangs belowBelow
- 45 mm
- Filament
- 367 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
C-47 Hanger Strip8-10 C-47s handle-down- Sticks outOut
- 32 mm
- Hangs belowBelow
- 45 mm
- Filament
- 151 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Markers & lights
4
Marker and Eraser RackSharpies and markers- Sticks outOut
- 54.5 mm
- Hangs belowBelow
- 32 mm
- Filament
- 348 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Paint Pen RackPaint pens- Sticks outOut
- 48 mm
- Hangs belowBelow
- 23 mm
- Filament
- 191 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Flashlight Holster1 in body flashlight, tail cap up to ~28 mm- Sticks outOut
- 49.3 mm
- Hangs belowBelow
- 36.2 mm
- Filament
- 87 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Rocket Blower HolderRocket blower; 61-64 mm bulb gripped by ribs- Sticks outOut
- 76 mm
- Hangs belowBelow
- 29 mm
- Filament
- 137 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Pockets & holsters
11
Slate Holster (acrylic slate)Full-size slate up to 16 mm thick- Sticks outOut
- 29 mm
- Hangs belowBelow
- 81 mm
- Filament
- 220 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Slate Holster (smart slate)Full-size smart slate up to 38 mm thick- Sticks outOut
- 53 mm
- Hangs belowBelow
- 93 mm
- Filament
- 249 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Clipboard HolsterClipboard- Sticks outOut
- 29 mm
- Hangs belowBelow
- 61 mm
- Filament
- 248 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
4x5.65 Filter PocketFilter pouches up to 180 x 15 mm- Sticks outOut
- 47 mm
- Hangs belowBelow
- 73 mm
- Filament
- 444 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Phone PocketPhone- Sticks outOut
- 30 mm
- Hangs belowBelow
- 83 mm
- Filament
- 182 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Radio HolsterWalkie (CP200d/BPR40), 26 mm earpiece-plug relief- Sticks outOut
- 74 mm
- Hangs belowBelow
- 60.7 mm
- Filament
- 139 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Meter, Scissors and Knife HolsterMulti-tool plus Fluke 117 meter or clipped 25 ft tape- Sticks outOut
- 65.5 mm
- Hangs belowBelow
- 63.4 mm
- Filament
- 345 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Light Meter Holster (fits Sekonic L-858D)Cart holster that fits the Sekonic L-858D: screen readable while docked, dome and buttons never touched, one-hand draw.- Sticks outOut
- 62.9 mm
- Hangs belowBelow
- 70.2 mm
- Filament
- 132 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Colour Meter Holster (fits Sekonic C-800)Cart holster that fits the Sekonic C-800: receptor fully clear, screen readable, side buttons relieved.- Sticks outOut
- 42.9 mm
- Hangs belowBelow
- 64.2 mm
- Filament
- 130 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Light and Colour Meter Duo Holster (fits Sekonic L-858D + C-800)Both meters side by side in one cart holster: L-858D on the left, C-800 on the right.- Sticks outOut
- 62.9 mm
- Hangs belowBelow
- 70.2 mm
- Filament
- 270 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Meter Kit Cup (4 x AA + lens cap)4 x AA (one change for each meter, 12.5 mm proud to pinch) + 46 mm cone cup (L-858D lens cap or 30.5-40.5 step-up ring)- Sticks outOut
- 61.3 mm
- Filament
- 173 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Grip
3
Grip Head TreeTwo 2-1/2 in grip heads on M5 posts (~102 mm out with heads)- Sticks outOut
- 50.3 mm
- Hangs belowBelow
- 90 mm
- Filament
- 270 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Baby and Junior Stud RackBaby/junior studs, spuds, 3 in plates- Sticks outOut
- 44.3 mm
- Hangs belowBelow
- 45 mm
- Filament
- 340 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Baby Pin Post (Steel Spud)Park a baby-pin accessory- Sticks outOut
- 12 mm
- Hangs belowBelow
- 70 mm
- Filament
- 127 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Batteries & power
10
V-Mount Battery BinV-mount batteries (66 mm, or 49.5 mm with spacer)- Sticks outOut
- 88 mm
- Hangs belowBelow
- 74 mm
- Filament
- 530 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
NP-F Battery CaddyNP-F batteries- Sticks outOut
- 78 mm
- Hangs belowBelow
- 38 mm
- Filament
- 322 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
AA/AAA Battery Dispenser + Dead Bin2 x 12 AA with caps on, plus the DEAD cup holster (detent grooves; needs ~210 mm headroom to lift the cup)- Sticks outOut
- 44 mm
- Hangs belowBelow
- 134 mm
- Filament
- 407 g
Includes 5 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Solidcom Charging Case + Pack StationDrop-in pocket for the Hollyland Solidcom 8-slot battery charging case (cable out either end) and a dock for 8 spare packs: charged row, flat row.- Sticks outOut
- 42.3 mm
- Hangs belowBelow
- 82 mm
- Filament
- 178 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Eartec Battery Station (FRESH / DEAD)Ten LX600Li packs on end, split FRESH and DEAD, with snap channels underneath that run the charger lead to the power strip.- Sticks outOut
- 56.2 mm
- Hangs belowBelow
- 45 mm
- Filament
- 308 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Latching, FRESH/DEAD CardsTwo 18 V packs, even the big 12 Ah and Forge packs, slide in toward the cart and lock with their own latch. Flip cards show FRESH or DEAD at a glance. Fits a 256 mm bed; add docks side by side for more bays.- Filament
- 216 g
Includes 4 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Latching, FRESH/DEAD CardOne 18 V pack on one DOCK tongue: slides in toward the cart and clicks with its own latch. For XC5.0 and HIGH OUTPUT 6/8 Ah packs (not 12 Ah). Fills the odd gap next to a bigger dock.- Filament
- 105 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Click-In Pockets, FRESH/DEAD CardsTwo 12 V stem packs push into pockets toward the cart. Their own catches click into side windows and four crush ribs stop rattle. Flip cards show FRESH or DEAD. 150 mm wide, fits any bed.- Filament
- 171 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Airflow, Cord Routing, StrapHangs one rapid or multi-voltage charger (up to 204 x 176 mm) on the cart side: rails and slotted floor for air, snap-in cord slot, figure-8 cord cleats, tall lips and a strap path. DOCK mount.- Filament
- 319 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
18 V Compact Heat Gun Boot, Nozzle in Free AirThe heat gun stands on its own pack in a deep boot, held by drop-in shims and a strap; the nozzle is 127 mm from any plastic. Fits 18 V compact heat guns (e.g. Milwaukee M18 compact).- Filament
- 165 g
Includes 3 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Labels
9
Camera Label PlateLabel plate- Sticks outOut
- 14.2 mm
- Hangs belowBelow
- 0 mm
- Filament
- 102 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Grip Label PlateLabel plate- Sticks outOut
- 14.2 mm
- Hangs belowBelow
- 0 mm
- Filament
- 101 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Electric Label PlateLabel plate- Sticks outOut
- 14.2 mm
- Hangs belowBelow
- 0 mm
- Filament
- 102 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
G&E Label PlateLabel plate- Sticks outOut
- 14.2 mm
- Hangs belowBelow
- 0 mm
- Filament
- 101 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Sound Label PlateLabel plate- Sticks outOut
- 14.2 mm
- Hangs belowBelow
- 0 mm
- Filament
- 101 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
DIT Label PlateLabel plate- Sticks outOut
- 14.2 mm
- Hangs belowBelow
- 0 mm
- Filament
- 101 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Blank Tape Label PlateBlank plate for 2 in paper tape- Sticks outOut
- 13 mm
- Hangs belowBelow
- 0 mm
- Filament
- 117 g
2 sizes / versions
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
A Cam Label PlateLabel plate- Sticks outOut
- 14.2 mm
- Hangs belowBelow
- 0 mm
- Filament
- 101 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
B Cam Label PlateLabel plate- Sticks outOut
- 14.2 mm
- Hangs belowBelow
- 0 mm
- Filament
- 101 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Set tools
5
Work Glove ClipOne pair of work gloves- Sticks outOut
- 19.7 mm
- Hangs belowBelow
- 72 mm
- Filament
- 83 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Compressed Air Can HolsterCompressed-air can, 63.5-71 mm- Sticks outOut
- 83.3 mm
- Hangs belowBelow
- 118 mm
- Filament
- 159 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
T-Handle Hex Key Rack (Inch)Inch T-handle hex keys 5/64-9/64- Sticks outOut
- 28.3 mm
- Hangs belowBelow
- 45 mm
- Filament
- 245 g
Includes 2 pieces
- Backstage cart lip
- Dock
- Mountless
T-Handle Hex Key Rack (Metric)Metric T-handle hex keys- Sticks outOut
- 28.3 mm
- Hangs belowBelow
- 45 mm
- Filament
- 343 g
- Backstage cart lip
- Dock
- Mountless
Tape Measure and DISTO StationTape measure plus Leica DISTO D2/D1/D110- Sticks outOut
- 39.3 mm
- Hangs belowBelow
- 83 mm
- Filament
- 213 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Electric
2
Cube and T-Tap Station3 cube taps or Leviton 697 T-taps; no metal- Sticks outOut
- 98 mm
- Hangs belowBelow
- 74 mm
- Filament
- 360 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Voltage Tester Holster2 pen voltage testers plus a Fluke T5/T6- Sticks outOut
- 59 mm
- Hangs belowBelow
- 133 mm
- Filament
- 400 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Wraps & ties
6
One-Wrap Cable Wrap StationPre-cut hook-and-loop wraps: bulk on a closed bar, 1/2, 3/4, 1 in sorted on the keeper strip- Sticks outOut
- 46 mm
- Hangs belowBelow
- 104 mm
- Filament
- 222 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
One-Wrap Roll HolderOne roll of One-Wrap strap, 1/2-1 in, 3 in core, up to 200 mm across- Sticks outOut
- 57.8 mm
- Hangs belowBelow
- 148 mm
- Filament
- 240 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Zip Tie Sorter 4/8/11/14 inZip ties stood up by length (4, 8, 11, 14 in) plus bongo ties; 345 mm long, needs a 350 mm bed- Sticks outOut
- 34.8 mm
- Hangs belowBelow
- 303 mm
- Filament
- 400 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Electrical Tape Backstock Tower8 rolls of 3/4 in electrical tape on 1-1/4 or 1-1/2 in cores; tongue relief widened to r 6-13.6 so the cap clicks- Sticks outOut
- 102 mm
- Hangs belowBelow
- 181 mm
- Filament
- 204 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Gaff Tape Backstock Tower3 x 2 in gaff, or 6 x 1 in paper, or 12 x 1/2 in spike, on 3 in cores; 179 out with full rolls, use the non-door side- Sticks outOut
- 179 mm
- Hangs belowBelow
- 184 mm
- Filament
- 584 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Paper Tape Backstock Tower4 x 1 in paper/artist tape (or 8 x 1/2 in spike) on 3 in cores- Sticks outOut
- 154 mm
- Hangs belowBelow
- 133 mm
- Filament
- 441 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Bottles, wipes & gloves
2
Spray Bottle Hanger with Snap Gate1 trigger spray bottle, 28/400 neck, plus a microfibre pinch slot- Sticks outOut
- 72 mm
- Hangs belowBelow
- 50 mm
- Filament
- 130 g
4 sizes / versions
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Nitrile Glove Box HolderNitrile glove box up to 233 x 66 (spacers for 218-221 x 61)- Sticks outOut
- 81.5 mm
- Hangs belowBelow
- 96 mm
- Filament
- 304 g
Includes 8 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Video village
7
Power Strip Saddles (Slim)Slim power strips 42-47.5 tall x <=34 deep; pair L+R, M5 thumbscrew clamp- Sticks outOut
- 51.3 mm
- Hangs belowBelow
- 57 mm
- Filament
- 56 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Power Strip Saddles (Standard)Standard 6-outlet surge bars 50-56.5 x <=44; pair L+R- Sticks outOut
- 61.3 mm
- Hangs belowBelow
- 66 mm
- Filament
- 61 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Power Strip Saddles (Wide/Metal)Wide/metal strips 59-65.5 x <=40; pair L+R- Sticks outOut
- 57.3 mm
- Hangs belowBelow
- 75 mm
- Filament
- 63 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Headphone Saddle with Cord CleatFull-size headphones (MDR-7506 class) with a coiled-cord cleat- Sticks outOut
- 91.9 mm
- Hangs belowBelow
- 66 mm
- Filament
- 122 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Comtek Kit Bay (Receiver + Headset)One PR-216 receiver plus a light on-ear headset up to ~140 mm across the cups; butt bays side by side for a row- Sticks outOut
- 78.3 mm
- Hangs belowBelow
- 67 mm
- Filament
- 291 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Comtek Receiver Row (3 + Cleats)3 Comtek receivers with earset cord cleats (receivers only)- Sticks outOut
- 59.3 mm
- Hangs belowBelow
- 67 mm
- Filament
- 324 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Trash Bag Horns + Bag PocketTrash/grocery bag handle, short horn (mouth about 35 mm)- Sticks outOut
- 58 mm
- Hangs belowBelow
- 45 mm
- Filament
- 49 g
4 sizes / versions
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Camera care
4
Kimwipes + Lens Fluid StationKimwipes 34155 small box opening-up, plus a 43-46 mm lens-fluid bottle- Sticks outOut
- 131 mm
- Hangs belowBelow
- 56 mm
- Filament
- 302 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Lens Wipe Packet + Fluid StationWrapped lens-wipe packets up to about 74 mm square, plus a lens-fluid bottle; full 8 mm clamp wall- Sticks outOut
- 83 mm
- Hangs belowBelow
- 91 mm
- Filament
- 218 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Lens Cap Board (Cine + Stills)Hanger for the lens cap plates (plates hang in front of it)- Sticks outOut
- 10 mm
- Hangs belowBelow
- 133 mm
- Filament
- 260 g
Includes 5 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Rig Parts Park RailArca plates, 15/19 mm rods, clamps, rosettes on studs, under 1 kg; gate insert on a flat-topped boss- Sticks outOut
- 31.9 mm
- Hangs belowBelow
- 84 mm
- Filament
- 358 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Hand tools
16
2-Slot Pliers RackDikes + wire stripper, jaws-down- Sticks outOut
- 38.8 mm
- Hangs belowBelow
- 58.5 mm
- Filament
- 192 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
4-Slot Pliers Rack4 pliers-type tools jaws-down (dikes, pliers, stripper, 9 in linesman)- Sticks outOut
- 38.8 mm
- Hangs belowBelow
- 58.5 mm
- Filament
- 382 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Precision Driver and Bit Block10 precision drivers + 46 x 1/4 in bits- Sticks outOut
- 56.5 mm
- Hangs belowBelow
- 59.5 mm
- Filament
- 401 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Screwdriver and Bit Block4 screwdrivers + 2 nut drivers up to 9/16 in + 40 x 1/4 in bits- Sticks outOut
- 67 mm
- Hangs belowBelow
- 59.5 mm
- Filament
- 374 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Shop Towel Roll HolderShop towel roll up to 130 mm across, via end caps; thumbscrew required; full roll 134 out / 140 down- Sticks outOut
- 102 mm
- Hangs belowBelow
- 90.4 mm
- Filament
- 59 g
Includes 4 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Impact Bit Bar with Magnet Click12 labelled insert bits + 6 nut setters / power bits. Each bit clicks onto a magnet and stays on a bumpy cart.- Filament
- 202 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Saw Blade Bin with Spent-Blade PodRecip and 12 in hacksaw blade lanes with magnets, a utility-blade magazine, a sealed SPENT pod and a divided MISC well.- Filament
- 286 g
Includes 3 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Tape Measure + Utility Knife Belt BarHang your tape and folding knife by their own belt clips. A ridge clicks them on, and the label shows when one is missing.- Filament
- 100 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
3/8 in Socket Rail, Metric 10-19 mm, Click PostsSockets click onto spring posts and stay on when the cart bumps. Labelled sizes, seat rings, graduated spacing.- Filament
- 153 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
3/8 in Socket Rail, SAE 5/16-3/4 in, Click PostsSockets click onto spring posts and stay on when the cart bumps. Labelled sizes, seat rings, graduated spacing.- Filament
- 124 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
18 V Impact Driver Fork with Click FingersDrop the impact driver in by its grip and it clicks. Pull it out one-handed. The direction switch stays free. 4 spare-bit sockets. Fits 18 V compact impact drivers (e.g. Milwaukee M18).- Filament
- 153 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
18 V Drill / Hammer Drill Fork with Click FingersThe click-in fork with room for a drill's motor behind the grip. Chuck out, battery down, direction switch free. Fits 18 V compact drills and hammer drills (e.g. Milwaukee M18).- Filament
- 173 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
12 V Compact Drill / Impact Driver Fork with Click FingersCompact 12 V size of the click-in driver fork. The direction switch stays free. 4 spare-bit sockets. Fits 12 V drills and impact drivers (e.g. Milwaukee M12).- Filament
- 103 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
12 V Cordless Ratchet SleeveHead-down sleeve for a 12 V 3/8 in cordless ratchet (long or stubby). Grab the handle and go; flex bands stop the rattle.- Filament
- 74 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
12 V One-Hand Recip Saw Sleeve with Blade SheathNose-down cone sleeve for a 12 V one-hand reciprocating saw (e.g. M12 Hackzall size) with a CP stem pack. The blade sits in a closed sheath.- Filament
- 165 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Steel Face for Magnet Work Lights + Keyhole StudGives a magnet-back work light (e.g. M12 Rover size) a home on an aluminium cart: tilted steel face, ledge, keyhole stud, tether hole.- Filament
- 199 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Comms & headsets
12
Hollyland Solidcom C1 Headset SaddleHangs a Solidcom C1 or C1 Pro single-ear on the cart side: soft crowned band saddle, adjustable cup cradle that stops swing, boom slot, battery door left clear.- Sticks outOut
- 92.3 mm
- Hangs belowBelow
- 172 mm
- Filament
- 233 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Hollyland C1 Pro Dual-Ear SaddleHangs a Solidcom C1 Pro dual-ear (stereo) on the cart side: soft crowned band saddle, adjustable cup cradle that stops swing, boom slot, battery door left clear.- Sticks outOut
- 96.3 mm
- Hangs belowBelow
- 177 mm
- Filament
- 245 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Solidcom C1 Crew RowMaster bay + crew bays for Hollyland Solidcom C1 headsets. Bays butt together on the lip for the right spacing, with room to swap batteries on the cart.- Sticks outOut
- 92.3 mm
- Hangs belowBelow
- 172 mm
- Filament
- 283 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Solidcom C1 Pro Dual-Ear Crew RowMaster bay + crew bays for Hollyland Solidcom C1 Pro Dual-Ear headsets. Bays butt together on the lip for the right spacing, with room to swap batteries on the cart.- Sticks outOut
- 96.3 mm
- Hangs belowBelow
- 177 mm
- Filament
- 295 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Solidcom HUB Base CradlesPair of end cradles that hang the Hollyland Solidcom HUB base on the cart side on its long edge. Antennas and ports left clear, strap option for the truck.- Sticks outOut
- 88.3 mm
- Hangs belowBelow
- 195 mm
- Filament
- 115 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Solidcom Headset Saddle (BB-1)Hollyland Solidcom C1 / C1 Pro headset saddle with cup cradle on the BB-1 dovetail for the ToughBuilt box bar.- Sticks outOut
- 92.3 mm
- Hangs belowBelow
- 172 mm
- Filament
- 181 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Eartec UltraLITE Double SaddleHead-form saddle for an UltraLITE double-ear headset: headband-shaped roof and seats that stop the cups swinging on a moving cart.- Sticks outOut
- 85.3 mm
- Hangs belowBelow
- 162 mm
- Filament
- 259 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Eartec UltraLITE Single SaddleHead-form saddle for an UltraLITE single-ear headset: headband-shaped roof and seats that stop the cups swinging on a moving cart.- Sticks outOut
- 85.3 mm
- Hangs belowBelow
- 162 mm
- Filament
- 264 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Eartec EVADE / PRO16 SaddleHead-form saddle for an EVADE / PRO16 headset: headband-shaped roof and seats that stop the cups swinging on a moving cart.- Sticks outOut
- 104 mm
- Hangs belowBelow
- 181 mm
- Filament
- 316 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Eartec UltraLITE Crew Row (3 + MAIN)Headset bays for a 4-person UltraLITE kit: head-form saddle and a spare-battery pocket per headset; one bay marked MAIN.- Sticks outOut
- 85.3 mm
- Hangs belowBelow
- 162 mm
- Filament
- 374 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Eartec HUB HolderDrop-in pocket for the Eartec HUB mini base: belt clip can stay on, top and antenna free above the deck, cord exit below.- Sticks outOut
- 61.8 mm
- Hangs belowBelow
- 53 mm
- Filament
- 245 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Eartec Headset Saddles (BB-1)UltraLITE double, single and EVADE head-form saddles that drop onto the BB-1 bar back block on a ToughBuilt box.- Filament
- 172 g
Includes 3 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Weather & comfort
14
Cart Snack Bar Dispenser (Standard)Bars stack flat and you pull one from the bottom with one finger. A fly and rain lid clicks shut, a window shows how many are left, and a side pocket holds gum or a small mint tin.- Filament
- 164 g
Includes 3 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Cart Snack Bar Dispenser (Wide)Bars stack flat and you pull one from the bottom with one finger. A fly and rain lid clicks shut, a window shows how many are left, and a side pocket holds gum or a small mint tin.- Filament
- 186 g
Includes 3 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Cart Hat Saddle with Brim ClipHang a cap or sun hat on a smooth vented crown dome. A sprung jaw pinches the brim so wind can't take it.- Filament
- 160 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Cart Mosquito Repeller Cradle + Refill BoxHolds a Thermacell MR300 / MR450-class repeller upright with its hot top down at deck level, where nothing on the shelf can drape over it, plus a shaded box for 5 butane cartridges and the mats.- Filament
- 337 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Cart First-Aid Kit Cradle + Pull-One Bandage Slot (Standard)A standard visible spot for a first-aid kit of any length, strapped in, with a side magazine that hands out one bandage at a time without opening the kit.- Filament
- 231 g
Includes 3 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Cart First-Aid Kit Cradle + Pull-One Bandage Slot (Wide)A standard visible spot for a first-aid kit of any length, strapped in, with a side magazine that hands out one bandage at a time without opening the kit.- Filament
- 249 g
Includes 3 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Cart First-Aid Kit Cradle + Pull-One Bandage Slot (Deep)A standard visible spot for a first-aid kit of any length, strapped in, with a side magazine that hands out one bandage at a time without opening the kit.- Filament
- 274 g
Includes 3 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Click-Lock Tilt Knuckle (1/4-20, Clamp Fan or Handheld Fan)A tilt knuckle that hangs a fan from the cart and locks in 15 degree clicks. A floating lock washer lets it re-aim properly. Two heads: a 1/4-20 stud with a clamp-fan tab, or a handheld-fan cradle with a snap lip.- Filament
- 60 g
Includes 9 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Cart Power-Bank Station with Cable Keeper and USB-C Plug ParkSpring-finger sleeve for 10k-20k power banks. A captive shock-cord loop holds the bank down, clip-in side shims stop narrow banks rattling, a window shows the charge lights, and a cable horn has a USB-C plug park.- Filament
- 58 g
Includes 3 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Work-Light Perch, Stow Bay, Band Cleat and Glow RimPerch your headlamp on the cart as a work light aimed 35 degrees down over the deck, stow it face-down in the bay for rolling, or hang it. The band wraps short on a cleat, and a glow rim helps you find it in the dark.- Filament
- 97 g
Includes 2 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Sunscreen Tube + Bug Spray Can (Quiet, Bounce-Proof)Sunscreen tube cap-down and a bug-spray can side by side. A spring finger stops the tube rattling, the can leans back into a tilted cup, and windows show what's left.- Filament
- 113 g
Includes 3 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
SPF Stick, Lip Balm, Sanitizer, Eye Drops + Earplug DispenserThe five little things you grab when you step into sun, wind, dust or noise, in one strip. Each one clicks in, vents and drains, and earplugs dispense one at a time from the bottom.- Filament
- 176 g
Includes 5 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Cart Cooling-Towel Bar with Gravity Ball Wind Locks and Snap-On PinchKeeps a cooling towel wet, aired and on the cart. Hang it open from two marble locks, or drape it and snap the pinch clip on: either way the wind can't take it.- Filament
- 85 g
Includes 4 pieces
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Sunglasses + Clear Glasses, Felt-Lined, Bump-Proof LipsTwo pockets, stadium-style: sunglasses behind and higher, clear or safety glasses in front. Lenses rest on felt, and lips over the pockets keep them in over curbs and cable ramps.- Filament
- 170 g
- Backstage cart lip
- ToughBuilt bar
- Dock
- Mountless
Mounts & adapters
10Adapters for the Dock (swap between mounts) version of any holder. Fix an adapter to your cart, bar, tube, rail, panel, clamp or baby pin and the holder clicks in from above; move it by printing another adapter. Each download has the hardware list.
Backstage Cart Lip AdapterHooks the upright lip on the edge of a Magliner / Backstage-style cart shelf.- Dock adapter
ToughBuilt Bar AdapterHooks the top edge of the steel bar on ToughBuilt StackTech / ClipTech.- Dock adapter
Round Tube Clamp (Horizontal)Horizontal round tube.- Dock adapter
Round Tube Clamp (Upright)Vertical 19-32 mm uprights and stand tubes.- Dock adapter
Square Tube ClampSquare tube on utility and tool cart frames or hand-truck handles: 25.4 mm (1 in) or 31.8 mm (1-1/4 in).- Dock adapter
T-Slot Rail AdapterAluminium T-slot extrusion.- Dock adapter
Inovativ Cart AdaptersInovativ-style carts.- Dock adapter
Screw-On Panel PlateFlat panels: plywood cart sides and shelves, tool-chest or cabinet sides, walls.- Dock adapter
Camera Thread / Mafer Clamp PlateAnything with female threads: cheese plates, rail plates, Savior-type clamps, magic-arm plates, the 1/4-20 hole on a super clamp.- Dock adapter
5/8 in Baby Pin (Spud) SleeveRound 5/8 in baby pin or spigot: A_SPUD_58 slides down over a pin pointing up (Mafer-type clamp pin, stand top, grip head pin); A_SPUD_58_h goes on a pin sticking out sideways (baby wall plate on a cart side).- Dock adapter
Nothing matches that. Try a simpler word, like "tape" or "bin".
Test pieces
16Small, quick prints to dial in the fit on your own cart, bar or tape before a long print. Start here if it is your first one.
00 slot fit test
Fit test slice
Coupon6 mm slice of a real holder: spindle, lock, guide, pad, gaff teeth; print first
Rib test12 mm test slice of the tape-mount crush rib; print first
Test slice20 mm slice to try a real #2 A-clamp and C-47
Label test20 mm crush-rib test slice for labels; print first
Fit coupon
Meter Holster Fit Coupon (Sekonic L-858D / C-800 cradle rings)Two 15 mm rings of the holster cavities: check the fit on your meter before the full print (~9 g).
Rail coupon M18
Pocket coupon M12
Band coupon 12
Band coupon 18
Click coupon
Drill Grip Fork Gauge (30-44 mm) + Rocker Band Coupons25-minute slot gauge plus two short fork-mouth coupons: find your slot, then check the direction switch and the click on the real tool.
Swap-Mount Fit CouponChecks the dovetail click, release and clearance before you print swappable holders and adapters.
Screw, Thread and 5/8 Pin Fit CouponChecks the 5/8 in pin bore, the countersinks, the camera-thread holes and the heat-set insert pockets.